CODESYS
versiondog supports the management of CODESYS projects and enables the cyclic monitoring of devices that have been projected with this development environment.
|
From |
CODESYS |
||||
|---|---|---|---|---|---|
|
V 2.1 |
V 2.3 | V 3.5 SP 9 | V 3.5 SP 10 -SP 15 | V 3.5 SP 16 -SP 18 | |
| versiondog 2.5 | ✓ | ✓ | |||
| versiondog 4.5 | ✓ | ✓ | ✓ | ||
| versiondog 8.0 | ✓ | ✓ | ✓ | ✓ | |
| versiondog 9.7 | ✓ | ✓ | ✓ | ✓ | ✓ |
Other system requirements
- The upload is carried out using the CODESYS PLC Handler.
- The comparison requires an installed CODESYS Editor with the compatible version.
versiondog automatically searches through the listed software for the correct editor in the following order (*only CODESYS V2X):
- CODESYS
- SoMachine (CODESYS V3)
- CPS21 (Bosch)*
- TwinCat (Beckhoff)** TwinCAT V3 contains its own editor.
- MOVITOOLS® MotionStudio (SEW-EURODRIVE)*
- ELAU (Schneider Electric)
- Indralogic (Bosch Rexroth)*
- EATON
Limitations
CODESYS V2.X:
-
For technical reasons, Project information and Block properties are not recognized during comparison.
CODESYS V3.X:
-
An upload is not currently possible.
-
Visualisation and user management are not supported.
Key features and functions
| Backup of all CODESYS-supported controllers that are accessible via CODESYS gateway server |
| Automatic change recognition between the program on the device and the current version on the server (backup detailed comparison, version and backup detailed comparison) |
| Clear presentation of complete change history |
| Custom component type for CODESYS projects |
| SmartCompare for CODESYS projects (version comparison) |
| Integrated CODESYS project tree |
| Open the editor directly from versiondog |
| Individual upload configuration for CODESYS |
| Related topics |
|---|
| Scripting |
In this tutorial:
Last updated: