Schneider Concept
versiondog supports the management of Schneider Concept projects and enables the cyclical monitoring of these devices.
The tutorial assumes that the reader has basic knowledge of the versiondog system and is familiar with Schneider Concept.
Network diagram
System requirements:
| versiondog version |
Schneider Concept version | |||
|---|---|---|---|---|
|
2.5 |
2.6 |
|||
| 3.2 | ✓ | ✓ | ||
Other system requirements
- The editor Schneider Concept cannot open projects if their paths contain more than 29 characters. An error message can be avoided by separating the component directory from the working directory. The working directory’s path needs to be shorter than 29 characters
- If relevant changes were made after the upload onto the PLC, a warning will be issued.
- We strongly recommend that you only create a version of edited projects after having completed the upload onto the PLC. Otherwise you run the risk that the backup’s timestamp and the current version do not match up. This can in turn lead to problems in production
Supported Schneider devices
QUANTUM:x13 0x_X
QUANTUM:x13 0x
VME:424 0x_X
QUANTUM:424 0x_X
QUANTUM:424 0x
QUANTUM:434/534
COMPACT:A145
685E:924
MOMENTUM:171 CCC ??0 ?0-IEC (with 1.30.2.0)
MOMENTUM:171 CCC 9?0 91
MOMENTUM:171 CCC ??0 ?0-984
ATRIUM:180 CC0 121 (fromv 2.6.0)
ATRIUM:180 CC0 241 (from v 2.6.0)
ATRIUM:180 CC0 S908 (from v 2.6.0)
Key features and functions
| Automated detection of program changes (backup and version comparison) | ✓ |
| SmartCompare for Schneider Concept projects (version comparison) | ✓ |
| Clear presentation of complete change history | ✓ |
| Custom component type for Schneider Concept projects | ✓ |
| Open the editor directly from versiondog | ✓ |
| Integrated Schneider Concept project tree | ✓ |
| Individual upload configuration for Schneider Concept | ✓ |
| No additional software required | ✓ |
In this tutorial:
Last updated: 15 Feburay 2021