Lenze 8400 protec
versiondog supports the management of L Force Engineering projects and enables the cyclical monitoring of these devices.
System compatibility
|
From version |
L Force Engineer (High level / state level) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
|
V2.12 |
V2.13 |
V2.14 |
V2.15 |
V2.16 |
V2.17 |
V2.19 |
V2.21 |
V2.22 |
|
|
versiondog 2.5 |
✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Notes about comparison
- To carry out an upload, you need to have installed one of the editors mentioned above on your computer.
- In the description files (located in the subdirectory of the editor), data needs to be present in order to carry out a comparison. Example:
-
All actual values are excluded from the comparison. A description of the target value and actual value can be found in the description files of the editor.
\Catalogs\Engineer\8400 protec.StateLine\DescriptionFiles
\Catalogs\Engineer\8400 protec.HighLine\DescriptionFiles
\Catalogs\Engineer\8400 protec.SafetyModule\DescriptionFiles
\Catalogs\Engineer\8400 protec.ProfinetModule\DescriptionFiles
Key features and functions
| Automatic detection of program changes (backup and version comparison) |
| SmartCompare for Lenze 8400 protec projects (version comparison) |
| Clear presentation of complete change history |
| Component type for Lenze 8400 protec projects |
| Open the editor directly from versiondog |
| Integrated L Force Engineer project tree |
| Custom upload configuration for Lenze 8400 protec |
| No additional software required |
|
Supported devices: All high level and state level devices that are supported by L Force Engineer |
In this tutorial
Last updated: